Thermal Conductive Silicone Release Film
RE-PHAR
Product Features
1.Production and processing in a Class 1000 environment under a Class 10000 purification bureau, with high cleanliness
2. Uniform coating, stable release force, and small variation amplitude
3.The appearance is scratch free, with good flatness, no wrinkles, no dirt, and no crystal dots
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent/blue, etc
5.Customization requirements for special release agents 1-100g
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meet
Product Features
1.Production and processing in a Class 1000 environment under a Class 10000 purification bureau, with high cleanliness
2. Uniform coating, stable release force, and small variation amplitude
3.The appearance is scratch free, with good flatness, no wrinkles, no dirt, and no crystal dots
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent/blue, etc
5.Customization requirements for special release agents 1-100g
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meet