Silicon free non silicon PET release film
RE-PHAR
Product composition
This release film is made of transparent PET (polyester film) as the substrate and coated with non silicon release material on one side.
Product Features
1. The value of overweight peeling is stable;
2. No silicon transfer, high residual adhesion;
3. The coating is uniform and there are no obvious coating marks;
● Product specifications
1. Width: 1070mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound
according to customer requirements)
3. Core inner diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
This transparent PET non silicon release film is suitable for making the bottom film of PET hot bending film
● Instructions for use
For optimal usage, it is recommended to use this product within 6 months from the date of purchase;
2. After expiration, it must be retested before use;
3. Suggested storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
4. When using this product, please conduct sufficient research on whether the purpose (purpose, conditions) is suitable in advance, and decide whether the product meets its standards on your own. The content outside the specification sheet cannot be guaranteed.
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are manufacturer.
Q2: Do you provide samples ? is it free or extra ?
A2: Yes, we could offer A4 sample for free charge but if you need in roll,we can offer 100-200m/roll for free, but shipping cost need you to paid.
Q3: How long is your delivery time?
A3: Depends on your quantity. Generally it is about 10-15 days for 5000㎡
Q4: How to pay for your goods?
A4: T/T (30% deposit before production, 70% balance before loading).
Product composition
This release film is made of transparent PET (polyester film) as the substrate and coated with non silicon release material on one side.
Product Features
1. The value of overweight peeling is stable;
2. No silicon transfer, high residual adhesion;
3. The coating is uniform and there are no obvious coating marks;
● Product specifications
1. Width: 1070mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound
according to customer requirements)
3. Core inner diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
This transparent PET non silicon release film is suitable for making the bottom film of PET hot bending film
● Instructions for use
For optimal usage, it is recommended to use this product within 6 months from the date of purchase;
2. After expiration, it must be retested before use;
3. Suggested storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
4. When using this product, please conduct sufficient research on whether the purpose (purpose, conditions) is suitable in advance, and decide whether the product meets its standards on your own. The content outside the specification sheet cannot be guaranteed.
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are manufacturer.
Q2: Do you provide samples ? is it free or extra ?
A2: Yes, we could offer A4 sample for free charge but if you need in roll,we can offer 100-200m/roll for free, but shipping cost need you to paid.
Q3: How long is your delivery time?
A3: Depends on your quantity. Generally it is about 10-15 days for 5000㎡
Q4: How to pay for your goods?
A4: T/T (30% deposit before production, 70% balance before loading).