Availability: | |
---|---|
Quantity: | |
Release film for curing OCA
RE-PHAR
Product composition
This release film is made ofPET (polyester film) as the substrate, with a layer of organic silicon adhesive evenly coated on the surface, and then covered with a layer of release material.
Product Features
1.Silicone oil has stable release force and high residual adhesion
2.Production and processing under a thousand level purification environment
3. Uniform coating, stable release force, small variation amplitude, light high-speed peeling
4. The appearance is scratch free, with good flatness, no wrinkles, no dirt, and no crystal dots
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent
5.Customization requirements for special release agents 1-50g
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the prod
Product composition
This release film is made ofPET (polyester film) as the substrate, with a layer of organic silicon adhesive evenly coated on the surface, and then covered with a layer of release material.
Product Features
1.Silicone oil has stable release force and high residual adhesion
2.Production and processing under a thousand level purification environment
3. Uniform coating, stable release force, small variation amplitude, light high-speed peeling
4. The appearance is scratch free, with good flatness, no wrinkles, no dirt, and no crystal dots
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent
5.Customization requirements for special release agents 1-50g
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the prod