English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
R715T（S）
RE-PHER
R715T（S）
Product composition
This release film is based on PET (polyester film) and coated with silicone release agent on one side.
Product Features
1. High cleanliness in production and processing under a thousand level purification environment;
2. Uniform coating, stable release force, and small range of variation;
3. The appearance is scratch free, with good flatness, wrinkles, dirt, and crystal dots;
4. High residual adhesion rate (≥ 90%), minimal silicon transfer, no impact on the performance of adhesive materials, and no pollution.
Product specifications
1. Width: 1010mm (can be customized according to customer requirements)
2. Length: 200-3000m (cut and rewound according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2 millimeters) or 6 inches (152.4 millimeters)
4. PET color: transparent
5. Customization requirements for special release agents ranging from 200-1000g
Scope of application
PET release film for graphite rolling
The thickness of graphite sheets used in the market mainly includes 17um, 25um, and 40um. The specifications of graphite sheets are usually customized by graphite rolling machines according to the needs of their customers. During the entire graphite rolling process, PET release film is used as the carrier to press and bond the graphite. The release film and graphite sheet are rolled by a roller to cover the graphite and release film together, resulting in the best effect and less likely to fall off. Our R714T (S) (75u transparent PET release film 250-350g) is particularly suitable for graphite rolling process.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During use, static electricity may be generated when unwinding or rewinding. The electrostatic layer can damage the release layer, resulting in poor peeling. If necessary, anti-static treatment can be applied to the back or static elimination equipment can be used.
2. For optimal use, it is recommended to use this product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the purpose (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards on your own. Cannot guarantee content beyond specifications.
Product composition
This release film is based on PET (polyester film) and coated with silicone release agent on one side.
Product Features
1. High cleanliness in production and processing under a thousand level purification environment;
2. Uniform coating, stable release force, and small range of variation;
3. The appearance is scratch free, with good flatness, wrinkles, dirt, and crystal dots;
4. High residual adhesion rate (≥ 90%), minimal silicon transfer, no impact on the performance of adhesive materials, and no pollution.
Product specifications
1. Width: 1010mm (can be customized according to customer requirements)
2. Length: 200-3000m (cut and rewound according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2 millimeters) or 6 inches (152.4 millimeters)
4. PET color: transparent
5. Customization requirements for special release agents ranging from 200-1000g
Scope of application
PET release film for graphite rolling
The thickness of graphite sheets used in the market mainly includes 17um, 25um, and 40um. The specifications of graphite sheets are usually customized by graphite rolling machines according to the needs of their customers. During the entire graphite rolling process, PET release film is used as the carrier to press and bond the graphite. The release film and graphite sheet are rolled by a roller to cover the graphite and release film together, resulting in the best effect and less likely to fall off. Our R714T (S) (75u transparent PET release film 250-350g) is particularly suitable for graphite rolling process.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During use, static electricity may be generated when unwinding or rewinding. The electrostatic layer can damage the release layer, resulting in poor peeling. If necessary, anti-static treatment can be applied to the back or static elimination equipment can be used.
2. For optimal use, it is recommended to use this product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the purpose (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards on your own. Cannot guarantee content beyond specifications.
