English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
R702B02EE
REPHER
Product composition
This protective film is made of blue PET (polyester film) as the substrate, with a layer of organic silicon adhesive evenly coated on the surface, and then covered with a layer of release material.
Product Features
1. Produced in a Class 1000 dust-free workshop with a beautiful appearance;
2. It has good absorption and automatic exhaust function;
3. Easy to peel off, can be repeatedly pasted, with no residual glue or traces;
4. Easy to die cut, powder free;
5. Excellent appearance, good light transmittance, and can be used as an anti-static layer and other functional layers
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent/red/yellow/blue/black/white, etc
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards. The content outside the instruction manual cannot be guaranteed.
Product composition
This protective film is made of blue PET (polyester film) as the substrate, with a layer of organic silicon adhesive evenly coated on the surface, and then covered with a layer of release material.
Product Features
1. Produced in a Class 1000 dust-free workshop with a beautiful appearance;
2. It has good absorption and automatic exhaust function;
3. Easy to peel off, can be repeatedly pasted, with no residual glue or traces;
4. Easy to die cut, powder free;
5. Excellent appearance, good light transmittance, and can be used as an anti-static layer and other functional layers
Product specifications
1. Width: 1040mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewound according to customer requirements)
3. Core diameter (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
4. PET color: transparent/red/yellow/blue/black/white, etc
Scope of application
Low viscosity silicone protective film, suitable for die-cutting process of thermal conductive graphite sheets.
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During the unwinding or rewinding process, static electricity may be generated. The electrostatic layer may damage the release layer, resulting in poor peeling. If necessary, please perform ESD treatment on the back or use ESD equipment to eliminate static electricity.
2. For optimal results, it is recommended to use the product within 6 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store at an ambient temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards. The content outside the instruction manual cannot be guaranteed.
