Color: | |
---|---|
Size: | |
Material: | |
Availability: | |
Quantity: | |
R702B02EE
REPHER
Product composition
This protective film is made of blue PET (polyester film) as the substrate, the surface is evenly coated with a layer of organic silicone adhesive, and then covered with a layer of release material.
Product characteristics
1. Thousand grade dust-free workshop production, good appearance;
2. With good absorption, and automatic exhaust function;
3. Easy to peel, can be repeatedly pasted, no residual glue, no traces;
4. Easy to die cut, no powder;
Product specification
1. Width: 1040mm(can be customized according to customer requirements)
2. Length: 200m-4000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube) : 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
Low viscosity silicone protective film suitable for die cutting process of thermal conductive graphite sheet.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the unwinding or winding process. The static electricity layer may damage the release layer, resulting in poor stripping. If necessary, perform ESD treatment on the back or use an ESD device to eliminate static electricity.
2. In order to obtain the best results, it is recommended to use the product within 6 months from the date of purchase;
3. After expiration, it must be re-tested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store at an ambient temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. When using this product, please fully study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards, and the content outside the specification cannot be guaranteed.
Product composition
This protective film is made of blue PET (polyester film) as the substrate, the surface is evenly coated with a layer of organic silicone adhesive, and then covered with a layer of release material.
Product characteristics
1. Thousand grade dust-free workshop production, good appearance;
2. With good absorption, and automatic exhaust function;
3. Easy to peel, can be repeatedly pasted, no residual glue, no traces;
4. Easy to die cut, no powder;
Product specification
1. Width: 1040mm(can be customized according to customer requirements)
2. Length: 200m-4000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube) : 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
Low viscosity silicone protective film suitable for die cutting process of thermal conductive graphite sheet.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the unwinding or winding process. The static electricity layer may damage the release layer, resulting in poor stripping. If necessary, perform ESD treatment on the back or use an ESD device to eliminate static electricity.
2. In order to obtain the best results, it is recommended to use the product within 6 months from the date of purchase;
3. After expiration, it must be re-tested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store at an ambient temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. When using this product, please fully study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards, and the content outside the specification cannot be guaranteed.