0.05mm transparent PET low silicon release film
RE-PHAR
Product Features
1.The release force is relatively stable, and trace elements are detected with a purification level of 10000. It is produced and processed in a local dry environment with high cleanliness, excellent appearance, and good light transmittance. It can be used as an anti-static coating
Product application
Used for release bonding of acrylic high adhesive tape, protective film and other products, as well as load-bearing of special coatings such as epoxy and polyurethane. Suitable for release, transfer bonding, and processing punching of adhesive materials for XPS controlled silicon elements
Product packaging
1. Products are generally packaged in cardboard boxes or wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
For optimal usage, it is recommended to use this product within 6 months from the date of purchase;
2. After expiration, it must be retested before use;
3. Suggested storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
4. When using this product, please conduct sufficient research on whether the purpose (purpose, conditions) is suitable in advance, and decide whether the product meets its standards on your own. The content outside the specification sheet cannot be guaranteed.
Product Features
1.The release force is relatively stable, and trace elements are detected with a purification level of 10000. It is produced and processed in a local dry environment with high cleanliness, excellent appearance, and good light transmittance. It can be used as an anti-static coating
Product application
Used for release bonding of acrylic high adhesive tape, protective film and other products, as well as load-bearing of special coatings such as epoxy and polyurethane. Suitable for release, transfer bonding, and processing punching of adhesive materials for XPS controlled silicon elements
Product packaging
1. Products are generally packaged in cardboard boxes or wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
For optimal usage, it is recommended to use this product within 6 months from the date of purchase;
2. After expiration, it must be retested before use;
3. Suggested storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
4. When using this product, please conduct sufficient research on whether the purpose (purpose, conditions) is suitable in advance, and decide whether the product meets its standards on your own. The content outside the specification sheet cannot be guaranteed.