English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
Product composition
This fluorine release film is based on transparent PET (polyester film) and coated with fluorosilicone resin on one side.
Product Features
1. Uniform coating and stable release force;
2. Small thickness tolerance and high transparency;
3. Low thermal shrinkage rate and good flatness;
4. High residual adhesion rate (≥ 90%), no impact on the performance of the adhesive material, and no pollution.
5.Excellent appearance, good light transmittance, and can be used as an anti-static layer
Product specifications
1. Width: 1060mm (customizable according to customer requirements)
2. Length: 200-4000m (cut and rewound according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2 millimeters) or 6 inches (152.4 millimeters)
4.PET: Transparent/Blue/White, etc
5. Matte/frosted finish
Scope of application
Suitable for silicone products (such as three-layer hot press film, gold finger tape, high-temperature green tape and other silicone product base films; silicone protective film, PI tape, silicone double-sided tape and other silicone product die-cutting and punching).
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During use, static electricity may be generated when unwinding or rewinding. The electrostatic layer can damage the release layer, resulting in poor peeling. If necessary, anti-static treatment can be applied to the back or static elimination equipment can be used.
2. For optimal use, it is recommended to use this product within 3 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the purpose (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards on your own. Cannot guarantee content beyond specifications.
Product composition
This fluorine release film is based on transparent PET (polyester film) and coated with fluorosilicone resin on one side.
Product Features
1. Uniform coating and stable release force;
2. Small thickness tolerance and high transparency;
3. Low thermal shrinkage rate and good flatness;
4. High residual adhesion rate (≥ 90%), no impact on the performance of the adhesive material, and no pollution.
5.Excellent appearance, good light transmittance, and can be used as an anti-static layer
Product specifications
1. Width: 1060mm (customizable according to customer requirements)
2. Length: 200-4000m (cut and rewound according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2 millimeters) or 6 inches (152.4 millimeters)
4.PET: Transparent/Blue/White, etc
5. Matte/frosted finish
Scope of application
Suitable for silicone products (such as three-layer hot press film, gold finger tape, high-temperature green tape and other silicone product base films; silicone protective film, PI tape, silicone double-sided tape and other silicone product die-cutting and punching).
Product packaging
1. Products are generally packaged in cardboard boxes and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be done according to customer agreements
instructions
During use, static electricity may be generated when unwinding or rewinding. The electrostatic layer can damage the release layer, resulting in poor peeling. If necessary, anti-static treatment can be applied to the back or static elimination equipment can be used.
2. For optimal use, it is recommended to use this product within 3 months from the date of purchase;
3. After the expiration date, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight and store indoors at a temperature of 25 ° C ± 2 ° C and a humidity of 60% ± 10%.
5. When using this product, please thoroughly study whether the purpose (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards on your own. Cannot guarantee content beyond specifications.
